FLOW CONTROL EQUIPMENT

SEPARATION SLEEVES FOR
MODEL "BL" SLIDING SLEEVE
"LSE" Product No. BI 805-41
(Selective)
"LGE" Product No. BI 805-50
(Top No-Go)

Separation Sleeve used in the Model 'BL' Sliding Sleeve is designed to SHUT off tubing to annulus flow through the Sliding Sleeve should the Sliding Sleeve become inoperative. "Straight Through Flow" through the Separation Sleeve is accomplished by a chevron packing system that will seal off in the upper and lower seal bores, isolating the ports of the Sliding Sleeve.

The Separation Sleeve is also designed with an internal equalizing plug to equalize pressure before retrieving.

MODEL "BLGE" SEPARATION SLEEVS SPECIFICATION GUIDE

Tubing

OD

Seal Bore

Size

Max OD

To Run

To Equalize

To Pull

'C-1' Running Tool, Prod. No. BI 811-06

'N-1' Shank Prod. No. BI 811-85

'A' Guide Prod. No. BI 811-71

'A' Prong Prod. No. BI 811-70

Pulling Tool

'N-1' Probe Prod. No. BI 812-13

In mm

In mm

In mm

2-1/16
52,37

1.562
39,62

1.56

1.615
41,02

1.900
48,26

2-1/16"
52,37

2-1/16"
52,37

7/16x28"

JUC

2-1/16
52,37

2-3/8
60,32

1.781
45,24

1.78

1.865
47,37

2-3/8
60,32

2-3/8
60,32

2-3/8
60,32

1/2"x30"

JUC or JDC

2-3/8
60,32

1.812
46,02

1.81

1.875
47,63

1.87

1.928
48,97

2-7/8
73,02

2.250
57,15

2.25

2.302
58,47

2-7/8
73,02

2-7/8
73,02

2-7/8
73,02

JUC or JDC

2-7/8
73,02

2.312
58,72

2.31

2.365
66,93

MODEL "BLSE" SEPARATION SLEEVES SPECIFICATION GUIDE

Tubing OD

Seal Bore

Size

To Run

To Equalize

To Pull

No-Go

Selective

'A' Guide
Prod. No. BI 811-71

'A' Prong
Prod. No. BI 811-70

Pulling
Tool

'A' Probe Prod. No. BI 812-06

Locating
Ring OD

'C-1' Running
Tool, Prod. No.
BI 811-06

'A' Shank
Prod. No.
BI 811-80

'E' Selective
Running Tool
BI 811-17

In.
mm.

In.
mm.

In.
mm.

2-1/16
52.37

1.562
39.67

1.56

1.593
40.46

1.900
48.26

2-1/16 x 4-3/4

1.900
48.26

2-1/16
52.37

7/16 x 28

JUC
or
JDC

1.900
48.26

1.625
41.28

1.62

1.656
42.06

2-3/8
60.33

1.781
45.24

1.78

1.807
45.90

2-3/8
60.33

2-3/8 x 5

2-3/8
60.33

2-3/8
60.33

1/2 x 27-1/2

JUC
or
JDC

2-3/8
60.33

1.812
46.02

1.81

1.84
46.79

1.875
47.63

1.87

1.906
48.41

2-7/8
73.02

2.250
57.15

2.25

2.281
57.94

2-7/8
73.02

2-7/8 x 4-11/16

2-7/8
73.02

2-7/8
73.02

5/8 x 28-9/16

JUC
or
JDC

2-7/8
73.02

2.312
58.72

2.31

2.343
59.51

3-1/2
88.90

2.750
69.85

2.75

2.781
70.64

3-1/2
88.90

3-1/2 x 5-5/16

3-1/2
88.90

3-1/2
88.90

5/8 x 35

JUC
or
JDC

3-1/2
88.90

2.812
71.42

2.81

2.843
72.21

4-1/2
114.30

3.688
93.68

3.68

3.802
96.57

4-1/2
114.30

4-1/2 x 7

4-1/2
114.30

4-1/2
114.30

---

JUC
or
JDC

4-1/2
114.30

3.812
96.82

3.81

3.843
97.61

[About us]  [Product Range/Catalogue]  [Certifications]  [Quality Policy]  [Noted/Terms & Conditions]  [Contact us]  [Enquiry]  [Feedback]  [Home]

[Cement Retainer]  [Bridge Plug]  [Accessories]  [Milling Tool]  [Float Shoe & Collar]  [Differential Fill-up Shoe & Collar]  [Stage Cementing Collar]  

[Cement Float Collar with Anti-Rotation Plugs]  [Duplex Cement Float Shoe & Collar]  [Stab-in Float Shoe & Collar]  [Liner Hanger & Accessories]

[Running Tool]  [Liner Hanger & Accessories]  [Running Tool]  [Casing Scrapper]  [Junk Basket]  [Retainer Production Packer]  [Packer Plug]

[Tubing Seal Assembly]  [Seal Bore Extension]  [Millout Extension]  [Expansion Joint]  [Spacer Tube]  [Wireline Entry Guide]  [Mechanical Packer]

[Hydrostatic Packer]  [Large Bore Hydrostatic Packer]  [Tension Packer]  [Tubing Anchor Catcher]  [Hydraulic Hold Down]  [Hydro-Trip Pressure Sub]

[Flow Coupling]  [Shear Out Ball Seat Sub]  [Safety Joint]  [Valve Latch]  [Dummy Valve]  [Retrievable Valve]  [Conventional Valve]  [Check Valve]

[Mandrel]  [Seating Nipple]  [Sliding Sleeve]  [Separation Sleeve]  [BD-2 Shifting Tool]  [Check Valve]  [Choke]  [Blanking Plug]  [Guide]  [Shank]

[Probe]  [Prong]  [C-1 Running Tool]  [JDC Pulling Tool]  [Soft Release Running Tool]  [JUC Pulling Tool]  [Instrument Hanger]  [Non Elastomeric Sliding Sleeve]

[B Shifting Tool]  [B Separation Sleeve]  [SB Pulling Tool]  [RB Pulling Tool]