FLOW CONTROL EQUIPMENT - RUNNING & PULLING TOOLS

"A" GUIDE

Product No.BI 811-71

The Model "A" Guide is basically a prong carrier. It centres and limits the prong penetration during equalizing operations.

MODEL "A" SHANK

Product No. BI 811-80

The Model "A" Shank is used with the "C-1" Running Tool to run "S", "W" and "Z" locks (retracted) during running and it can also be used as a prong carrier when prongs are required during running operations.

"A" prong is widely used in running and pulling operations. "B" prong runs "R" type blanking plugs. "C" prong equalizes "R" blanking plugs.

MODEL "N-1" SHANK

Product No. BI 811-85

The Model "N-1" Shank is used in conjunction with the Model "C-1" Running Tool to run and land Flow Control Equipment having a "G" or "R" lock.

"N-1" Probe

Product No. BI 812-13

The Model "N-1" is used to retrieve "G" and "R" locks.

"A" Prong

Product No. BI 811-70

"B" Prong

Product No. BI 811-72

"C" Prong

Product No. BI 811-73

"A" Probe

Product No. BI 812-06

The Model "A" is used to retrieve "S" locks.

"B" Probe

Product No. BI 812-07

The Model "B" is used to retrieve "W" and "Z" locks.

 

[About us]  [Product Range/Catalogue]  [Certifications]  [Quality Policy]  [Noted/Terms & Conditions]  [Contact us]  [Enquiry]  [Feedback]  [Home]

[Cement Retainer]  [Bridge Plug]  [Accessories]  [Milling Tool]  [Float Shoe & Collar]  [Differential Fill-up Shoe & Collar]  [Stage Cementing Collar]  

[Cement Float Collar with Anti-Rotation Plugs]  [Duplex Cement Float Shoe & Collar]  [Stab-in Float Shoe & Collar]  [Liner Hanger & Accessories]

[Running Tool]  [Liner Hanger & Accessories]  [Running Tool]  [Casing Scrapper]  [Junk Basket]  [Retainer Production Packer]  [Packer Plug]

[Tubing Seal Assembly]  [Seal Bore Extension]  [Millout Extension]  [Expansion Joint]  [Spacer Tube]  [Wireline Entry Guide]  [Mechanical Packer]

[Hydrostatic Packer]  [Large Bore Hydrostatic Packer]  [Tension Packer]  [Tubing Anchor Catcher]  [Hydraulic Hold Down]  [Hydro-Trip Pressure Sub]

[Flow Coupling]  [Shear Out Ball Seat Sub]  [Safety Joint]  [Valve Latch]  [Dummy Valve]  [Retrievable Valve]  [Conventional Valve]  [Check Valve]

[Mandrel]  [Seating Nipple]  [Sliding Sleeve]  [Separation Sleeve]  [BD-2 Shifting Tool]  [Check Valve]  [Choke]  [Blanking Plug]  [Guide]  [Shank]

[Probe]  [Prong]  [C-1 Running Tool]  [JDC Pulling Tool]  [Soft Release Running Tool]  [JUC Pulling Tool]  [Instrument Hanger]  [Non Elastomeric Sliding Sleeve]

[B Shifting Tool]  [B Separation Sleeve]  [SB Pulling Tool]  [RB Pulling Tool]