RETRIEVABLE PACKER SYSTEM
MODEL "B-AD-1" TENSION PACKER SPECIFICATION GUIDE
|
Casing |
Packer | ||||||||||
|
OD |
Weight |
ID Range in which Packer may be Run |
Size
|
Nom ID
|
Guide Ring OD |
Standard Thread Specification Box Up & Pin Down
|
|||||
| Min. | Max. | ||||||||||
|
In. mm. |
lb/ft. |
In.
|
mm. |
In.
|
mm. |
In. mm. |
In. mm. |
In. mm. |
|||
|
5-1/2 139.70 |
20-23 |
4.625 |
117.50 |
4.778 |
121.40 |
45A2 |
1.97 50.04 |
4.500 114.30 |
2-3/8 60.33 O.D. EU 8RD |
||
|
15.5-20 |
4.778 |
121.4 |
4.950 |
125.7 |
45A4 |
4.641 117.88 |
|||||
|
13-15.5 |
4.950 |
125.7 |
5.190 |
131.8 |
45B
|
4.781 121.44
|
|||||
|
5-3/4 146.05 |
22.5 |
||||||||||
|
6 152.40 |
26 |
||||||||||
|
20-23 |
5.191 |
131.9 |
5.390 |
136.9 |
45C |
5.062 128.57 | |||||
|
15-18 |
5.391 |
136.9 |
5.560 |
141.2 |
45D |
5.156 130.96 | |||||
|
6-5/8 168.28 |
34 |
5.561 |
141.2 |
5.595 |
142.1 |
45E2 |
5.406 137.31 | ||||
|
28-32 |
5.596 |
142.1 |
5.791 |
147.1 |
45E4 |
5.484 139.29 | |||||
|
24 |
5.830 |
148.1 |
5.921 |
150.4 |
47A2 |
2.42 61.47 |
5.656 143.66 |
2-7/8 73.02 O.D. EU. 8RD |
|||
|
17-20 |
5.922 |
150.4 |
6.135 |
155.8 |
47A4 |
5.812 147.62 | |||||
|
7 177.80 |
38 |
5.830 |
148.1 | 5.921 |
150.4 |
47A2 | 5.656 143.66 | ||||
| 32-35 | 5.922 | 150.4 | 6.135 | 155.8 | 47A4 | 5.812 147.62 | |||||
| 26-29 | 6.136 | 155.9 | 6.276 | 159.4 | 47B2 | 5.968 151.59 | |||||
| 20-26 | 6.276 | 159.4 | 6.456 | 164.0 | 47B4 | 6.078 154.38 | |||||
| 17-20 | 6.456 | 164.0 | 6.538 | 166.0 | 47C2 | 6.266 159.16 | |||||
|
7-5/8 193.68 |
33.7-39 | 6.539 | 166.1 | 6.765 | 171.8 | 47C4 | 6.453 163.91 | ||||
| 24.29.7 | 6.766 | 171.9 | 7.025 | 178.4 | 47D2 |
2.42 61.47 |
6.672 169.47 | ||||
| 20-24 | 7.025 | 178.4 | 7.125 | 181.0 | 47D4 | 2.42 61.47 |
6.812 173.02 |
||||
|
9-5/8 244.48 |
47-53.5 | 8.300 | 210.8 | 8.681 | 220.5 | 51A2 |
4.00 101.60 |
8.218 208.74 |
4-1/2 114.30 O.D.EU 8RD LG CSG |
||
| 40-47 | 8.681 | 220.5 | 8.835 | 224.4 | 51A4 | 8.437 214.30 | |||||
| 29.3-36 | 8.836 | 224.4 | 8.681 | 220.5 | 51B | 8.593 218.26 | |||||
|
TUBING ANCHOR CATCHER MODEL "BTA" TUBING ANCHOR CATCHER Product No. Bl 698-0A The Botil Model "BTA" acts as a tubing anchor to maintain tension in tubing string as a tubing catcher to prevent parted pipe from falling to the bottom of the well. Application: Most rod pumping applications where it is important to maintain tension in the tubing. Feature :
SPECIFICATION GUIDE
|
 |
|||||||||||||||||||||
[About us] [Product Range/Catalogue] [Certifications] [Quality Policy] [Noted/Terms & Conditions] [Contact us] [Enquiry] [Feedback] [Home]
[Cement Retainer] [Bridge Plug] [Accessories] [Milling Tool] [Float Shoe & Collar] [Differential Fill-up Shoe & Collar] [Stage Cementing Collar]
[Cement Float Collar with Anti-Rotation Plugs] [Duplex Cement Float Shoe & Collar] [Stab-in Float Shoe & Collar] [Liner Hanger & Accessories]
[Running Tool] [Liner Hanger & Accessories] [Running Tool] [Casing Scrapper] [Junk Basket] [Retainer Production Packer] [Packer Plug]
[Tubing Seal Assembly] [Seal Bore Extension] [Millout Extension] [Expansion Joint] [Spacer Tube] [Wireline Entry Guide] [Mechanical Packer]
[Hydrostatic Packer] [Large Bore Hydrostatic Packer] [Tension Packer] [Tubing Anchor Catcher] [Hydraulic Hold Down] [Hydro-Trip Pressure Sub]
[Flow Coupling] [Shear Out Ball Seat Sub] [Safety Joint] [Valve Latch] [Dummy Valve] [Retrievable Valve] [Conventional Valve] [Check Valve]
[Mandrel] [Seating Nipple] [Sliding Sleeve] [Separation Sleeve] [BD-2 Shifting Tool] [Check Valve] [Choke] [Blanking Plug] [Guide] [Shank]
[Probe] [Prong] [C-1 Running Tool] [JDC Pulling Tool] [Soft Release Running Tool] [JUC Pulling Tool] [Instrument Hanger] [Non Elastomeric Sliding Sleeve]
[B Shifting Tool] [B Separation Sleeve] [SB Pulling Tool] [RB Pulling Tool]