PERMANENT PACKER SYSTEM - ACCESSORIES

MODEL "BIM" EXPANSION JOINT
Product No. BI 995-59

Description

Model BIM Expansion Joint is designed for use above packers in well completions to compensate for tubing movement during treating and injecting operations and where rotation through the tool is required. The design allows torque to be applied through the tool at any position.

Features

  • Rotationally locked at all times for transmitting torque
    when required.

  • Multi-spline design for high torque load.

  • Maximized tension carrying capability.

  • ID compatible with tubing ID.

  • Tool can be pinned at one foot spacing from closed to
    fully stroked position.

  • Shear value can be adjusted by varying the number of
    shear screws.

• Torsional Rating

7,500 ft-lb for Standard Service application at 110,000 psi material yield.

5,500 ft-lb for Sour Service application at 80,000 psi material yield.

• Pressure Rating

7,500 psi for Standard Service application at 110,000 psi material yield.

5,000 psi for Sour Service application at 80,000 psi material yield.

• Temperature Rating

300 degree F for Standard Nitrile Chevron at 0% H2S

200 degree F for 70 Hard Bonded Nitrile at 0% H2S

300 degree F for 90 Hard Bonded Nitrile at 0% H2S

275 degree F for 95 Hard Viton at 5% H2S

300 degree F for V-Ryte at 15% H2S

450 degree F for V-Ryte at 5% H2S

300 degree F for A-Ryte at 20% H2S

450 degree F for A-Ryte at 5% H2S

        • Tensile Rating is compatible with tubing.

  

[About us]  [Product Range/Catalogue]  [Certifications]  [Quality Policy]  [Noted/Terms & Conditions]  [Contact us]  [Enquiry]  [Feedback]  [Home]

[Cement Retainer]  [Bridge Plug]  [Accessories]  [Milling Tool]  [Float Shoe & Collar]  [Differential Fill-up Shoe & Collar]  [Stage Cementing Collar]  

[Cement Float Collar with Anti-Rotation Plugs]  [Duplex Cement Float Shoe & Collar]  [Stab-in Float Shoe & Collar]  [Liner Hanger & Accessories]

[Running Tool]  [Liner Hanger & Accessories]  [Running Tool]  [Casing Scrapper]  [Junk Basket]  [Retainer Production Packer]  [Packer Plug]

[Tubing Seal Assembly]  [Seal Bore Extension]  [Millout Extension]  [Expansion Joint]  [Spacer Tube]  [Wireline Entry Guide]  [Mechanical Packer]

[Hydrostatic Packer]  [Large Bore Hydrostatic Packer]  [Tension Packer]  [Tubing Anchor Catcher]  [Hydraulic Hold Down]  [Hydro-Trip Pressure Sub]

[Flow Coupling]  [Shear Out Ball Seat Sub]  [Safety Joint]  [Valve Latch]  [Dummy Valve]  [Retrievable Valve]  [Conventional Valve]  [Check Valve]

[Mandrel]  [Seating Nipple]  [Sliding Sleeve]  [Separation Sleeve]  [BD-2 Shifting Tool]  [Check Valve]  [Choke]  [Blanking Plug]  [Guide]  [Shank]

[Probe]  [Prong]  [C-1 Running Tool]  [JDC Pulling Tool]  [Soft Release Running Tool]  [JUC Pulling Tool]  [Instrument Hanger]  [Non Elastomeric Sliding Sleeve]

[B Shifting Tool]  [B Separation Sleeve]  [SB Pulling Tool]  [RB Pulling Tool]