TYPICAL HOOKUP WITH
MILLOUT EXTENSION AND
FLOW CONTROL ACESSORIES
(1) Any Seal Bore Packer
Permanent packers are generally available for threading extensions below the packer and designated with the model letter "B" added to the packer model, as "BDB" etc.
(2) "B" Guide for Millout extension
The "B" versions of these packers are the same basic packers as the regular versions as far as construction, running and setting, holding characterstics, etc., are concerned. The only difference is the lower guide, which in the "B" versions is threaded to accept the various extensions.
(3) MILLOUT EXTENSION
Product No. BI 499-41
For packers that will eventually be milled out using the Model "CJ" Packer Milling Tool, the Millout Extension is used to provide the length and inside diameter necessary to accommodate the mandrel and catch sleeve of a standard Milling Tool. Millout Extensions are not required when using the Model "CK" Packer Milling Tool.
(4) Crossover Sub—Millout Extension to tailpipe
Product No. BI 266-69 or BI 469-10
(5) Tubing Coupling Product No. BI 457-60
(6) Spacer Tube Product No. BI 457-40
(7) Model "F" Seating Nipple
Product No. BI 801-50
(8) Perforated Spacer Tube
Product No. BI 457-43
(9) Model "R" Seating Nipple
Product No. BI 801-55
(10) Spacer Tube Product No. BI 457-40
(11) Wireline Entry Guide
Product No. BI 469-21
