MODEL "DR" LOCATOR TYPE PACKER PLUG
Product No. BI 665-01
The Model "DR" Locator Type Packer Plug is used to convert a Model "BD", "BF-1" Retainer Production Packer that has been previously set, into a temporary bridge plug. It permits the performance of pressuring operation above the packer without affecting the zones below. It is attached with shear screws to a shear sub which is made up on the bottom of the work string or a retrievable squeeze tool. Set-down weight shears the screws and leaves the plug in the packer. It is retrieved with a conventional overshot.
MODEL "DR" LATCHING TYPE PACKER PLUG
Product No. BI 665-03
The Model "DR" Latching Type Packer Plug is used for the same purpose and in the same way as the locator type but will hold pressure in both directions. It is run in the same way but is retrieved by holding a slight upstrain and turning to the right 15 turns after engaging with a conventional overshot.
Model "DR" Packer Plugs Prod. Nos. BI 665-01, BI 665-03
Selection Guide
| Packer | Packer Plug Size | ||
| Model | Series |
Locator Prod. BI 665-01 |
Latching Prod. BI 665-03 |
| BF-1 | 20-23 | BI 20-23 | BI 20-23 |
| BD | 30-25 | BI 20-25 | BI 20-25 |
| BD, BF-1 |
40-30 |
BI 60-30 | BI 60-30 |
|
60-30 |
|||
| BD | 80-26 | BI 80-26 | BI 80-26 |
| BD | 80-32 | BI 80-32 | BI 80-32 |
| BF-1 | 80-40 | BI 80-40 | BI 80-40 |
| BD | 190-40 | BI 80-40 | BI 80-40 |
| BD | 190-47 | BI 190-47 |
BI 212-47 |
|
BI 190-47 |
|||
| BF-1 | 190-60 | BI 190-60 | BI 190-60 |
