MODEL BSAB-3 SPECIFICATION GUIDE
| Casing | Packer | Packer Sealing Bore | |||||||||
| O.D. | Weight | I.D. Range in which Packer may be Run | Size | O.D. | Upper | Lower | |||||
| Min | Max | Seal Bore | Seal Assembly Size | Min. Bore Thru Seals |
Seal Bore |
Seal Assembly Size | Min. Bore Thru Seals | ||||
| In. mm | Lb/ft | In. mm | In. mm | In. mm | In. mm | In. mm | In.mm | In. mm | |||
|
5 127.00 |
15-21 |
4.125 104.78 |
4.436 112.67 |
32BSAB30 X 19 |
3.968 100.79 |
3.000 76.20 |
20FA30 | 2.390 60.71 | 1.968 49.99 |
20-19 |
1.000 25.40 |
| 21-19 | 1.312 33.27 | ||||||||||
|
5-1/2 139.70 |
13-17 |
4.812 122.22 |
5.044 128.12 |
44BSAB30 X 25 |
4.500 114.30 |
3.250 82.55 |
40DA32 |
2.500 63.50 |
2.500 63.50 |
20-25 |
1.875 47.63 |
| 6-5/8 168.28 | 17-32 | 5.675 144.15 | 6.135 155.83 | 82BSAB40 X 32 | 5.468 138.89 |
4.000 101.60 |
80DA40 |
3.250 82.55 | 3.250 82.55 |
80-32 |
2.406 61.11 |
| 17-20 | 6.049 153.64 | 6.456 163.98 | 84BSAB40 X 32 | 5.687 144.45 | |||||||
|
7 177.80 |
32-44 |
5.675 144.15 |
6.135 155.83 |
82BSAB40 X 32 |
5.468 138.89 |
||||||
|
20-32 |
6.049 153.64 |
6.456 163.98 |
84BSAB40 X 32 |
5.687 144.45 |
|||||||
|
17-20 |
6.456 163.98 |
6.765 171.83 |
88BSAB40 X 32 |
6.187 157.15 |
|||||||
| 8-5/8 219.08 | 24-36 | 7.812 198.42 | 8.150 207.01 | 128BSAB47 X 40 | 7.500 190.50 | 4.750 120.65 | 81FA47 | 3.875 98.43 | 4.000 101.60 | 80/120-40 |
3.000 76.20 |
|
9-5/8 244.48 |
32.3-58.4 |
8.435 214.25 |
9.001 228.63 |
194BSAB60 X 47 |
8.125 206.38 |
6.000 152.40 |
190DA60 |
4.875 123.83 |
4.750 120.65 |
191-47 |
2.500 63.50 |
| 190-47 | 3.000 76.20 | ||||||||||
| 192-47 | 3.875 98.43 | ||||||||||
| 194BSAB60 X 47 | 4.875 123.83 | - | - | ||||||||
|
MODEL "BK-22" ANCHOR TUBING SEAL NIPPLE Product No. Bl 443-38 Used for sealing in the upper bore of Model "BDA", "BFA", "BSAB-3" Packers. Supplied with one seal stack and blank or half mule shoe bottom sub which will not accommodate tail pipe of production tubes. The Seal Stack can be provided suiting to the specific Well conditions. The "BK-22" Anchor features metal-to metal internal connections for hostile environments. The Top connection can be specified as requested. AUTO ORIENTING BOTTOM SUB WITH HALF MULE SHOE Product No. BI 442-34-A0
The bottom sub of L.T.S.A is provided with double-start helical groove and two Guide Pins. Half mule shoe as shown in the accompanying illustration. The double-start helix provides for uniform self orienting action of the Half mule shoe to permit easy entry in the Packer bore.
|
|
